How to fix Not able to Access

This guide shows you how to get rid of ” Not able to Access ” issue. All we know that by default, a router’s IP address is configured to or more or less something very similar to this IP address.

You may be having problem accessing your router configuring using IP address. This article shows you how to fix Unable to Access issue. This instructions will help to configure your router settings correctly.

Fix for Not able to Access
Router Configuration Using IP Address

Let’s see the simple ways to solve Router Configuration.

1. The simple solution is to reboot your router by just turning your router OFF and back ON.

2. The next solution is to re-configuring your router is to ” reset your router to its factory settings. You should follow the router’s instruction manual to perform the factory reset option. Make a note that you will lose all of your custom settings by doing factory reset of your Router.

Not able to Access

Not able to Access

If neither of the above two solutions work, it is possible that your configuration issues are due to a change in your router’s IP address. You may easily fix this by performing a network scan (192.168.x.0 to 192.168.x.254, 10.x.x.0 to 10.x.x.254).

Now The router settings can be accessed and modified from a computer connected to the router. The configuration page can be accessed on the router through the internet browser effectively. Please share this guide below Facebook & Twitter.